Estocure P is a liquid curing compound for the prevention of premature water loss in concrete.
Estocure P is applied to fresh concrete surfaces to form a fast dry, thin flexible and tough, impervious membrane which protects the concrete from rapid water evaporation during initial curing stages, thereby assisting towards obtaining maximum strength, durability and helping towards the elimination of shrinkage cracks and surface dusting.
Estocure P is particularly useful in large areas of exposed concrete such as:
|Curing Efficiency Index,
BS 7542, 1992
|Loss of Water In 72 Hours
(kg/m²), ASTM C156-93
|Liquid Membrane Forming
Compound For Curing
Concrete, ASTM C309-93
|Specific Gravity at 25°C||1.02 – 1.05|
|Dry Film Colour||Clear Film|
|Dry Film @30 °C (approx.)||1 – 2 hrs|
Estocure P is supplied ready to use and should not be diluted with any forms of solvent / water. Stir well before use.
Estocure P is applied in a thin even coat using spray equipment to the fresh concrete immediately after the free surface water has evaporated. All loose particles should be removed and honeycomb to be repaired.
The nozzle of the spray should be held approximately 500mm from the surface and passed back and forth to effect complete coverage.
After application of Estocure P, it should be protected from rain for at least 3 hours.
Total disintegration of the membrane normally occurs after 5 weeks of application if the application rate is correct (5m²/litre).
Where subsequent surface treatment is to be undertaken before total disintegration of the membrane, Estocure P film shall be removed.
Estocure P should not be applied to dry concrete particularly on vertical surfaces or soffit of concrete, which may have partially dried out by being retained in shuttering. It is imperative that the concrete be well wetted before applying Estocure P. If this is not done, permanent staining will result.
|Estocure P||210 litre drum
20 litre pail
|Estocure P||5 m² per litre|
Estop offers a comprehensive range of high performance, high quality of repair product for both new and existing concrete surfaces. In addition, the company offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance.
Estocure P has a shelf life of 12 months at ambient room temperature in unopened condition.
If stored in extreme heat locations the shelf life may be reduced.
Estocure P should not be swallowed and avoid to be in contact with skin or eyes. Wear gloves and goggles for protection. If swallowed, seek medical attention immediately
Do not induce vomiting.
Estop manufactures and offers a wide range of complementary products which includes waterstops, waterproofing products, grouts, anchors, specialized flooring products. In addition, a wide range of products formulated for repair and refurbishment of spalled concrete are available.