Estopper Dumbbell waterstops are extruded from a high quality Polyvinylchloride compound, which has been formulated to provide excellent flexibility and longevity characteristic.
They are available as straight lengths and factory produced intersections.
Estopper Dumbbell centrally placed Polyvinylchloride waterstops are suitable for use in contact with potable water.
Estopper Dumbbell has been tested by SIRIM BHD, in accordance to BS 2782, ISO 527 on Tensile Strength and Elongation at Break Test, ISO 868 on Indentation Hardness Determination and complied with the specification in this data sheet.
They are used typically in the following type of structures:-
The appropriate waterstop width depends upon the concrete thickness. The width of waterstop should not be greater than the thickness of the concrete.
Plain Web sections are used in contraction and construction joints
Estopper PVC Dumbbell Range of waterstops are compatible to other Estopper CJ & EJ and Rearguard C & E Range of waterstops.
|Standard Conform||BS 2782 at 25°C|
|Tensile Strength||> 10.0 N/mm²|
|Elongation at Break||> 250%|
|Hardness||Shore ‘A’ > 70|
|Form||Extruded thermoplastic sections|
|Hydrostatic Head||Up to 50m for 230mm profile
Up to 30m for 150mm profile
Heat welding equipment is available from Estop Sdn Bhd. Ensure the heat welding equipments are earthed by the green wire.
Waterstops must be installed so that they are securely held in their position while the concrete is being placed. Concrete must be fully compacted around the waterstops to ensure that no voids or porous area remain.
Jointing of Estopper PVC range waterstop is carried out using Estop Heat Welding Equipment. The ends to be joined are cut square and held in alignment. The ends are then pressed to both side of a special heated blade, until an even, molten bead of Polyvinylchloride appears around the section. The heated blade is then removed and the molten ends pressed fully together. The Polyvinylchloride cools to form a strong fusion welded joint.
An experienced technician would performed the jointing of the waterstops to satisfaction, subject to prior training and approval by Estop Technical Department.
|Estopper 150 Dumbbell||150mm x 15m roll|
|Estopper 230 Dumbbell||230mm x 15m roll|
Estop offers a technical support package to specifiers, end-users and contractors, as well as on site technical assistance.
Estopper Dumbbell waterstops should be store under covered condition. The product has a shelf life of thirty six months.
Hot weld jointing of PVC waterstops results in the liberation of hydrogen chloride mist and vapour. The OEL (operational exposure limit) of 5 ppm can be exceeded in still air confined space, therefore ventilation must be provided.
Estop manufactures and offers a wide range of complementary products which includes waterstops, waterproofing products, grouts, anchors, specialized flooring products. In addition, a wide range of products formulated for repair and refurbishment of spalled concrete are available.