Thermoplastic Rubber Waterstop For High Movement Joints
The Estopper TPR is an integral sealing system for high movement joints in water retaining and water excluding structures. It is suitable for joints and structures subject to high water pressure, subsidence and seismic movements.
The Estopper TPR is suitable for structures where the joints are subjected to high water pressure or pronounce repeated movements.
Estopper TPR selection
Estopper TPR Dumbbell and Centre Bulb are centrally placed type of sealing system. Estopper TPR is particularly suited to high movement joints and joints in structures liable to subsidence.
Estopper TPR Dumbbell: Suitable for construction joints, contraction joints and joints where no shear movement is possible.
Estopper TPR Centre Bulb: Suitable for expansion joints and joints with high movement.
Estopper TPR is to be installed securely held in their correct position whilst the concrete is placed. The concrete must be fully and properly compacted around the Estopper TPR to ensure that no voids or porous areas remain.
No holes are to be made through any waterstop.
Estopper TPR can be jointed with Estop Heater Blade.
|Estopper TPR 150 Dumbbell||150mm x 15m roll|
|Estopper TPR 230 Dumbbell||230mm x 15m roll|
|Estopper TPR 150 Centre Bulb||150mm x 15m roll|
|Estopper TPR 230 Centre Bulb||230mm x 15m roll|
Estop offers a technical support package to specifiers, end- users and contractors, as well as on site technical assistance.
Estopper TPR should be store under covered condition. The product has a shelf life of thirty-six months.
Estop manufactures and offers a wide range of complementary products, which includes waterstops, waterproofing products, grouts, anchors, specialized flooring products. In addition, a wide range of products formulated for repair and refurbishment of spalled concrete are available.