Products
Estop Rubber Waterstops
08/07/2016Estobond PCA
02/11/2016
Description
Estoseal 115 is a white acrylic based gap filler in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper finishes. The inherent flexibility of Estoseal 115 will accommodate the small structural movements between finishes which would otherwise result in recurrent unsightly cracking.
Typical example of this are gaps between skirting, window and door frames, fitted furniture units and ceiling cornices and adjacent plasterwork. Where replacement windows are installed Estoseal 115 can be used to make good between new frames and interior plasterwork.
Uses
Suitable for :
- Wall / ceiling angles, cornices
- Door and window frame surrounds
- Fitted furniture
- Skirting
- Staircases
- Replacement window installations
Advantages
- Easy to apply and finish
- Excellent adhesion to most building materials
- Fast setting
- Non-staining
- Flexible seal
- Can be over painted or papered
Physical Properties
| Form | Paste |
|---|---|
| Colour | White / Grey |
| Solid Content | Min 84% |
| Density at 25°C | 1.64 kg/L |
| Physical or Chemical Change | Curing by loss of water |
| Application Temperature | 5 – 40°C |
| Skinning Time | 20 minutes at 25°C |
| Cure Rate 20°C at 65% RH | 2 weeks for total cure of 10mm bead |
| Water Immersion | Will resist water when cured but not suitable for immersed joints |
| Typical Hardness | 20 Shore ‘A’ at 25°C |
| UV Resistance | Excellent |
| Movement Accommodation | Physical Properties Estoseal 115 is formulated to accept the limited movement, normally up to 10%, associated with its suggested application. |
Application Instructions
Preparation
Surfaces shall be clean, dry and free from grease. Estoseal 115 adheres to most materials common in the building industry including concrete, brickwork, plaster, wood, plastics and glazed tiles. No priming is required.
Cut conical tip off cartridge end thread. Screw on nozzle, cut at 45° to required size and fit into sealant gun. Extrude sealant directly into joint ensuring complete contact with joint faces.
Tool the sealant off within 15 minutes of application using a scraper or to along stick dipped in clean plain water. Where a particularly neat finish is required use masking tape along the joint faces. Remove immediately after tooling.
Painting and Wallpapering
Estoseal 115 sets quickly after application and can be painted or wallpapered over approximately 1 to 8 hours, depending on size of crack and quantity of material used. Synthetic emulsion paints may be used.
Cleaning
Use damp cloth to clean the neighbouring surfaces. Tools may be cleaned in water.
Limitations
Estoseal 115 is not recommended for continuous water emersion.
Packing & size
| Estoseal 115 | 300ml cartridge |
|---|
Technical Support
Estop offers a technical support package to specifiers, end-users and contractors, as well as on site technical assistance.
Storage
Storage life of 12 months in original container when kept in dry conditions between 5°C and 27°C.
Precaution
Keep out of eyes, do not consume, keep away from children and pets and wash hands thoroughly after use.
Additional Information
Estop manufactures and offers a wide range of complementary products, which includes waterstops, waterproofing products, grouts, anchors, specialized flooring products. In addition, a wide range of products formulated for repair and refurbishment of spalled concrete are available.