High Performance Flexible Moisture Cured PU Modified Putty
Estoseal Hydro is a single component moisture cured PU modified putty designed to provide good adhesion and flexible seal for down pipe treatment and fine or minor crack (up to 1mm) repair before application of waterproofing coating.
|Application Temperature||5 oC to 50 oC|
All the surfaces must be clean, free from grease, oil, laitance, and remove all the dirt and contaminants, which might affect adhesion.
Take a convenient quantity of material from the container and apply this well around the down pipe 1 inch from the edge vertically up to the pipe and on the substrate surface.
Along the crack line and groove joint, area to be applied shall be cut to a V groove joint to give a good mechanical key. Surface shall be cleaned and all loose material to be removed. The cut groove joint shall be filled with Estoseal Hydro using appropriate tools.
Apply Estoseal Hydro along the joint in flashing 2 inches vertically up from the edge and 2 inches along the flashing.
|Estoseal Hydro||1 kg container ( 550 mL)|
Estop offers a technical support package to specifiers, end-users and contractors, as well as on site technical assistance.
Estoseal Hydro should be stored on pallets in dry conditions. Under these conditions the product will have a shelf life of 12 months.
If stored in extreme heat locations the shelf life may be reduced.
There is no known health hazards associated with Estoseal Hydro in normal use. However prolong skin contact should be avoided.
Estop manufactures and offers a wide range of complementary products which includes waterstops, waterproofing products, grouts, anchors, specialized flooring products. In addition, a wide range of products formulated for repair and refurbishment of spalled concrete are available.